An exceptional resin for exceptional potting. The time of annoying jump layers caused by multiple castings is over. With Resinpal 1717-N3, crystal-clear layer thicknesses of up to 15 centimeters are possible in just one operation.
The UV-resistant and very low-odour synthetic resin is able to cure without air bubbles even with high layer thicknesses due to its low exothermicity and the very good deaeration properties. The 2-component casting resin system with a mixing ratio of 100 parts resin to 45 parts hardener (by weight) hardens within 72 hours without being tacky.
Potter objects and items such as flowers, toys, natural materials and much more. With the thick layer resin Resinpal 1717-N3 there are no limits to your imagination.
We recommend a minimum processing temperature of 18°C.
How much Resinpal 1717-N3 casting resin can I cast in one application? The epoxy casting resin Resinpal 1717-N3 can be cast up to a casting height of approx. 15 cm. However, we recommend not to pour more than 15 kg per application.
Can I color Resinpal 1717-N3 with acrylic colors? Since Resinpal 1717-N3 is an epoxy resin, we only recommend adding epoxy colors and translucent colors.
How strong is the odor development during processing? The low-odour processing with epoxy resins is a great advantage.
The casting resin has turned white, tough or solid in the bottle. What can I do? Epoxy resins can crystallize above a certain temperature. This can happen if the product is stored too cold or during shipping. This process can be reversed by adding heat (approx. 50°C), for example by placing the container (open the lid first) in a water bath or saucepan.
