RESINPAL
Items 1 - 10 of 14
Peel ply with a basis weight of 80 g/m² and plain weave. Is laminated into the laminate as the top layer and peeled off after hardening. A rough, even structure is created. Width: 100 cm.
Very easily drapable glass filament fabric with a weight per unit area of 163 g/m² in twill weave. Suitable for light to medium-weight components and for surface reinforcements. Processable with epoxy and polyester resin. Width: 100 cm.
Very easily drapable glass filament fabric with a weight of 80 g/m² in twill weave. Suitable for light components, model making and pronounced geometries. Processable with epoxy resin and polyester resin. Width: 100 cm.
Non-shifting glass filament fabric with a weight per unit area of ??80 g/m² in plain weave for flat surfaces. Suitable for filigree components, light laminates, model making and reinforcements. Processable with epoxy and polyester resin. Width: 100 cm.
PVA release agent (green) should be applied into the mold as the last release layer and can be used very well in combination with release wax (liquid) or the release paste.
Release paste can be used on both closed-pore and open-pore surfaces. It is ideally suited for use in wood, stone, plaster, GRP molds, etc.
Release wax (liquid) is preferably used for smooth forms such as GRP forms. It is particularly suitable in combination with PVA release varnish.
Non-shifting glass filament fabric with a weight of 50 g/m² in plain weave for flat surfaces. Suitable for filigree components, light laminates and model making. Processable with epoxy and polyester resin. Width: 100 cm.
Resinpal 2301 is a standard epoxy resin, which has a wide range for use. The epoxy resin can be used for the lamination of components, for the casting of unclear small castings and as an electrical casting compound.
Release spray is ideal for close-pored surfaces and silicone molds. Low odor and silicone-free.
Items 1 - 10 of 14