RESINPAL
Items 1 - 10 of 15
PVA release agent (green) should be applied into the mold as the last release layer and can be used very well in combination with release wax (liquid) or the release paste.
Release paste can be used on both closed-pore and open-pore surfaces. It is ideally suited for use in wood, stone, plaster, GRP molds, etc.
Release spray is ideal for close-pored surfaces and silicone molds. Low odor and silicone-free.
Release wax (liquid) is preferably used for smooth forms such as GRP forms. It is particularly suitable in combination with PVA release varnish.
The Epoxy Gelcoat Resinpal 2404-H is a whitish colored gelcoat with a brush consistency that hardens to become sticky on the air side. Resinpal 2404-H is placed in negative molds and can be colored with epoxy color pastes.
Crystal clear 2-component adhesive based on epoxy resin. Suitable for bonding fiberglass elements, wooden structures, metal and plastic fibers.
Biaxial glass fiber fabric with a weight of ??450 g/m² and with a +/- 45° weave. Well suited for components with application of force in the direction of the grain. Very good surface quality. Width: 125 cm.
Easily drapable glass filament fabric with a weight per unit area of ??280 g/m² in twill weave. Suitable for medium-weight components and surface reinforcements. Processable with epoxy and polyester resin. Width: 100 cm.
Non-shifting glass filament fabric with a weight per unit area of ??280 g/m² in plain weave for flat surfaces. Suitable for light and medium-weight components, finishing layers and reinforcements. Processable with epoxy and polyester resin. Width: 100 cm.
Easily drapable glass filament fabric with a weight of 390 g/m² in twill weave. Suitable for medium and heavy components as well as for surface reinforcements. Processable with epoxy and polyester resin. Width: 100 cm.
Items 1 - 10 of 15