Release wax (liquid) is preferably used when it comes to demolding GRP components from GRP molds or demolding castings from silicone molds. The liquid wax is a release agent based on polyethylene wax, for smooth and closed-pore surfaces. This effect can be further improved in combination with PVA-relase agent. For new molds, the application should be done 3 - 4 times in order to achieve a good result.
Release wax (liquid) should be applied on the mold by using a soft microfiber cloth or a sponge. After a drying time of approx. 5 minutes, the workpiece is ready for further processing and for polishing. A soft cloth (microfiber) should also be used for polishing. The consumption of Resinpal release wax (liquid) is approx. 50 ml / m²
How is Resinpal Release Wax (liquid) applied? The application is done with a microfiber cloth or a soft sponge.
What do I have to consider after applying Resinpal release wax (liquid)? After application, the wax must have formed a tack-free and matt film. The component can then be easily polished up. The drying time is approx. 5 to 10 minutes. With nine forms, the application should be carried out several times.
How productive is Resinpal release wax (liquid)? The consumption of Resinpal release wax (liquid) is approx. 50 ml per square meter.
For which applications can Resinpal release wax (liquid) be used? Resinpal release wax (liquid) can be used for applications with epoxy resin, polyester resin and polyurethane resin.
