Lexicon | Reinforcement Fibres
Carbon Fibre or Fibreglass – A Comparison
Carbon fibre and glass fibre are the two most important reinforcement fibres in composites. Here you will learn how the two materials differ in weight, stiffness, strength, price and processing – and which fibre is right for your project.
Summary
Carbon fibre is lighter and considerably stiffer than glass fibre. It is used where every gram counts and components must deform as little as possible. In return, carbon is much more expensive, more brittle and electrically conductive.
Glass fibre is affordable, impact-resistant, electrically insulating and very forgiving to process. For repairs, boat building, mould making and most everyday components, glass fibre is therefore the more economical choice.
At a Glance
- Carbon: very light, very stiff, high strength, expensive, electrically conductive
- Glass fibre: affordable, impact-resistant, more elastic, insulating, transparent to radio signals
- Resin: carbon mostly with epoxy resin, woven glass fabric with epoxy or polyester resin
- Rule of thumb: weight and stiffness decisive → carbon; price, toughness and easy processing → glass fibre
What You Will Learn in This Article
What Are Glass Fibre and Carbon Fibre?
Glass fibre is drawn from molten glass into very fine filaments. Composites mainly use so-called E-glass. Glass fibres are supplied as chopped strand mat, as woven glass fabric or as non-crimp fabric and are combined with resin to form GRP (glass-reinforced plastic).
Carbon fibre consists almost entirely of carbon. It is produced from organic precursor fibres in a complex process, which makes it considerably more expensive. Combined with resin, it forms CFRP (carbon-fibre-reinforced plastic).
In both cases, the fibre carries the loads, while the resin embeds, binds and protects the fibres.
Carbon and Glass Fibre Compared
The following values are typical guide values for the pure fibre (E-glass and standard carbon fibre). The properties of a finished component also depend on the resin, fibre content, fibre orientation and processing.
| Criterion | Glass fibre (E-glass) | Carbon fibre (standard) |
|---|---|---|
| Density | approx. 2.6 g/cm³ | approx. 1.8 g/cm³ |
| Stiffness (modulus) | approx. 70–75 GPa | approx. 230–240 GPa |
| Tensile strength | high | very high |
| Elongation at break | approx. 4–5 % – elastic, impact-resistant | approx. 1.5–2 % – more brittle |
| Electrical conductivity | insulating, transparent to radio signals | conductive, shields radio signals |
| Price | affordable | many times more expensive |
| Appearance | transparent to milky in the laminate | black, typical visible-carbon look |
Stiffness and Weight: Where Carbon Excels
The greatest advantage of carbon is its high stiffness at low weight. Under load, a carbon component deforms much less than a glass fibre component of the same weight. That is why carbon is used where parts need to be light and very stiff at the same time – for example in motorsport, bicycle and drone construction, or for rudders, masts and lightweight parts in model making.
If a component mainly needs to be strong and robust and weight plays a minor role, glass fibre often achieves a comparable result at a fraction of the cost – if necessary with an additional layer.
Impact Resistance and Damage Behaviour
Glass fibre is more elastic than carbon and tolerates impacts, knocks and deformation better. Damage to GRP components often shows as whitening and can be repaired well.
Carbon is more brittle. Impacts can cause internal damage that is barely visible from the outside. For components that are frequently exposed to knocks – such as boat hulls near the shore or panels – glass fibre is therefore often the more practical choice.
Electrical Properties and Galvanic Corrosion
Glass fibre is electrically insulating and transparent to radio signals. It is therefore suitable for housings of antennas, sensors or radio modules and for components in electrical installations.
Carbon conducts electricity and shields radio signals. In addition, carbon in direct contact with metals such as aluminium can cause galvanic corrosion in a damp environment.
Practical Tip
When carbon is joined to aluminium or steel, an insulating intermediate layer – for example one layer of woven glass fabric – should prevent direct contact.
Processing and Suitable Resin
Carbon fabric is usually processed with epoxy resin, as this is the only way to make full use of the fibre's performance. Woven glass fabric can be processed with epoxy resin and with polyester resin, classic chopped strand mat mainly with polyester resin.
- Cutting: Glass fibre can be cut easily with sharp scissors. Carbon frays more easily and requires clean work.
- Wetting out: Both fibres must be wetted out completely and without air bubbles. With glass fibre, the transparency shows clearly whether the laminate is fully saturated – with carbon, this is harder to see.
- Sanding: Carbon dust is electrically conductive and should be kept away from electronics. Use a dust mask and extraction for both materials.
Which glass fibre reinforcement suits your project is explained in the article Chopped Strand Mat or Woven Glass Fabric?
Hybrid Laminates of Carbon and Glass
Carbon and glass fibre can be combined in one laminate. Carbon is often used specifically in the most highly stressed areas or as a visible layer, while glass fibre provides bulk, toughness and a lower overall cost. This allows weight, stiffness and price to be balanced precisely.
Which Fibre for Which Project?
Choose glass fibre if …
- you are repairing GRP, e.g. boats, pools or motorhomes
- you are building moulds, panels or tanks
- the component needs to be robust and impact-resistant
- electrical insulation or radio transparency is required
- good value for money is important
Choose carbon if …
- low weight and high stiffness are decisive
- the component must hardly deform under load
- the typical visible-carbon look is desired
- the higher budget is justified
Find Glass Fibre Reinforcement and Resins
In the Fiberglas Discount shop you will find chopped strand mat, woven glass fabric in plain and twill weave, biaxial fabric and matching epoxy and polyester resins for your laminate.
View reinforcement fibres View woven glass fabric View epoxy resins
Frequently Asked Questions About Carbon and Glass Fibre
Is carbon better than glass fibre?
Not in general. Carbon is lighter and stiffer, but considerably more expensive and more brittle. Glass fibre is cheaper, more impact-resistant and the more economical choice for repairs, boat building and most everyday components.
How much lighter is carbon than glass fibre?
Carbon fibre itself has a density of about 1.8 g/cm³, E-glass about 2.6 g/cm³. As carbon is also considerably stiffer, components of equal stiffness can be built much lighter with carbon.
Which resin do you need for carbon?
Carbon fabric is usually processed with epoxy resin. Woven glass fabric can be processed with epoxy or polyester resin, chopped strand mat mainly with polyester resin.
Can carbon and glass fibre be combined?
Yes. In hybrid laminates, carbon is used specifically for stiffness or as a visible layer, and glass fibre for toughness and lower cost.
Why is glass fibre better suited for antenna housings?
Glass fibre is electrically insulating and transparent to radio signals. Carbon conducts electricity and shields radio signals.
Why Fiberglas Discount?
Specialist Range
Chopped strand mat, woven glass fabric, non-crimp fabrics, epoxy and polyester resins and accessories from a single source.
Practical Selection
Materials for GRP repair, boat building, mould making, model making and technical components.
Technical Know-How
Lexicon articles and guides help with material selection, processing and avoiding mistakes.
© 2026 - Content revision - www.fiberglas-discount.de